Control Arms for 2013 Lexus GX460 Base (4.6L V8)

Control arms connect your vehicle's frame to the wheel hub assembly, controlling vertical wheel movement while allowing steering motion. These triangular or L-shaped components contain pivot points with bushings or ball joints that enable your wheels to move up and down with road surfaces while maintaining proper alignment angles for tire contact and steering response.

Worn control arms create clunking noises over bumps, steering wheel vibration at highway speeds, uneven tire wear on inner or outer edges, vehicle pulling to one side while driving, and loose or wandering steering feel. You may notice tire squealing during turns or difficulty maintaining straight-line driving on level roads.

Control arms work directly with ball joints and control arm bushings to form the complete wheel control system. Ball joints act as the pivot points where control arms connect to the steering knuckle, while control arm bushings provide the cushioned mounting points to the vehicle frame. When control arms wear out, the connected ball joints often show wear from increased movement and stress, and the bushings may crack or separate from excessive lateral forces. This interconnected wear pattern means these components frequently need attention as a group to restore proper suspension geometry and eliminate noise.

Choose control arms with pre-installed ball joints when replacing worn assemblies to ensure proper torque specifications and alignment. Look for powder-coated or galvanized finishes for corrosion resistance, and verify the control arm includes all necessary hardware and bushings. Replace control arms in pairs when one side shows significant wear to maintain balanced suspension response and prevent premature tire wear.

How do control arms control wheel movement and steering?

Control arms connect the wheel hub to the vehicle frame through pivot points with bushings and ball joints. They allow vertical wheel movement for suspension travel while constraining lateral movement to maintain wheel alignment. The ball joint end connects to the steering knuckle, enabling steering motion, while the bushing end anchors to the frame to control wheel position during cornering and braking forces.

What are the signs control arms need replacement?

Listen for clunking or knocking noises over bumps, creaking sounds during steering, tire squealing in turns, steering wheel vibration at highway speeds, and vehicle pulling to one side. Check for uneven tire wear patterns, loose steering feel, difficulty maintaining straight-line driving, and visible separation or cracking in the ball joint boot or control arm bushings.

Should I buy control arms with ball joints already attached?

Control arm and ball joint assemblies offer better value and easier installation since the ball joint is pre-pressed and torqued to specification. Separate components require special tools for ball joint removal and installation, plus precise torque application. Complete assemblies also ensure compatibility between the control arm and ball joint, eliminating fitment issues that can occur when mixing component brands.